products
Magnetic particle inspection unit
磁粉探傷法にて検査する検査機器です。
Inspection unit using the magnetic particle inspection method.
(PAT No.3135541号)
Pulse 3 axis type magnetic particle inspection unit
3軸方向のパルス磁界を発生させ、微細傷を検出するコンベアー式磁粉探傷装置です。
従来のAC、DCコイル磁化では検出が困難な、鍛造品等の微細傷(40μm以下)の検査に適します。
This is a conveyor type magnetic particle inspection unit that catches minute defects by generating a pulse magnetic field in three axis directions.
It is suitable for examining minute flaws(40 μm or smaller)of parts such as forging which are difficult to detect by the conventional AC and DC coil magnetization.
Multiple alternation type magnetic particle inspection unit
クロスコイルと上下コイルの組み合わせによる複数交番磁化で、小物部品からシリンダーブロック等の大物部品までの検査に適します。
The detector exectes multiple alternation magnetization with a combination of cross coil and top and bottom coils and is suitable for small parts as well salarge parts such as a cylinder block.
Standard Ⅰ type
軸通電法、貫通磁化法、コイル磁化法等のあらゆる磁化方法が出来、長尺物の検査に適する。
This devise is capable of various magnetization methods such as an axis current method,penetrating magnetization,and coil magnetization,and is suitable for examining lengthy parts.
仕様
Specification
磁化ヘッド開き Opening of magnetic head | 0~1500mm 0~1500mm |
磁化コイル Magnetic coil | Ø300mm Ø300mm |
磁化ヘッド圧着 Magnetic head crimp | 電動式 Electric type |
Standard Ⅱ type
軸通電法、貫通磁化法、コイル磁化法等のあらゆる磁化方法が出来、長尺物の検査に適する。
This devise is capable of various magnetization methods such as an axis current method,penetrating magnetization,and coil magnetization,and is suitable for examining lengthy parts.
仕様
Specification
磁化ヘッド開き Opening of magnetic head | 0~1500mm 0~1500mm |
磁化コイル Magnetic coil | Ø300mm Ø300mm |
磁化ヘッド圧着 Magnetic head crimp | 手動ハンドル
|
Standard Ⅲ type
小物部品の検査に適する。
This type is suitable for examining small parts.
仕様
Specification
磁化ヘッド開き Opening of magnetic head | 0~600mm 0~600mm |
磁化コイル Magnetic coil | Ø200mm(補助コイル) Ø200mm(auxiliary coil) |
磁化ヘッド圧着 Magnetic head crimp | エアー式 |
Special type Ⅰ
あらゆる磁化が出来、多量品の検査に適する。
This type is capable of various kings of magnetization and suitable for examining parts in bulk.
仕様
Specification
磁化方法 Magnetizing method | 複数交番磁化方法 Multiple alternation magnetization method
単一コイル磁化方法 Single coil magnetization method |
磁化ヘッド開き Opening of magnetic head | 0~600mm 0~600mm |
磁化コイル Magnetic coil | Ø300mm&500mm Ø300mm&500mm |
磁化ヘッド圧着 Magnetic head crimp | エアー式 Air type |
Special type Ⅱ
NDI試験用&一般用検査に使用出来ます。
This type can be used for NDI test and general inspections.
仕様
Specification
磁化電流 Magnetizing current | AC 0~1500A AC 0~1500A |
磁化開き Magnetic opening | 0~350mm 0~350mm |
磁化コイル Magnetic coil | Ø100mm(補助コイル) φ100㎜(Auxially coil) |
磁化ヘッド圧着 Magnetic head crimp | スプリング式 Spring type |
Special type
仕様(計測部)
Specification(Measuring part)
型式 Type | チャンネル Channel | 仕様 Specification |
NJMT-1 | 2ch | 電源AC100V±10% 50/60Hz
|
NJMT-2 | 4ch | |
NJMT-3 | 6ch | |
NJMT-4 | 8ch | |
NJMT-5 | 特殊 Specific |
Inspection example for lighting
Automatic transportation device all-in-one design